Links to other pages on this site:
Home Page / Notice Board / To Order  /  10mm Figures & Flags

Starfort Models: 10/15mm ACW Fortifications & Buildings

All models are sold unpainted. Bases as shown in photographs are not included.

February 2009
PRICE INCREASE
Please add 10% to all prices
(except publications and flags)

 

Ref: AB1: Price £4.50

Clapboard Cabin with shingle roof.
The original for this model had every shingle individually applied to give maximum detail and character! Approx: 42x44mm, H:32mm

webab1.gif (307391 bytes)

 

2-arch.gif (21956 bytes)

3arch.jpg (71415 bytes)

Ref: AB2: 2-Arch Bridge.
106x29mm, H:20mm
Price £3.25

Ref: AB3: 3-Arch Bridge*.
115x30mm, H:20mm
Price £3.50

*figures available separately.

Ref: AB4: Price £4.50

Log cabin with planked roof. The chimney forms part of the resin casting.

Approx: 55x31mm, H:25mm

loghard2.jpg (30370 bytes)

 

Ref: AB5: Price £4.50

Timber barn with pitched shingle roof and extension on one side.
As with AB1, the original model
was individually tiled.

Approx: 51x46mm, H: 36mm

barn.jpg (13428 bytes)

 

meadehq.jpg (2468 bytes)

Ref: AB6: Price £4.50

Headquarters of Major Gen George G. Meade, commander of the Union forces at the Battle of Gettysburg July 1863.

Resin model with separate white metal porch rails.
Approx: 36x26mm, H:29mm

 

dunker.jpg (53713 bytes)

Ref: AB7: Price £5.00

Dunker Church (Antietam).
One of the objectives of the Union soldiers during the morning phase of the battle. The high ground around this building was held by the Confed. forces under the command of General Thomas J. ("Stonewall") Jackson.

Resin model, approx 68x53mm (incl steps). H: 42mm

robinson.jpg (58606 bytes)

Ref: AB8: Price £5.50

Robinson House (at the 1st Battle of Bull Run, 1861)

Resin model with sep. white metal porch   (in 3 sections).
Approx: 52x47mm, H:41mm

hhouse.jpg (32361 bytes)


Ref: AB9: Price £4.50

Henry House (at the 1st Battle of Bull Run, 1861)
Resin model. Approx: 49x40mm, H:39mm.

gthsfrnt.jpg (59297 bytes)
Front view


gthsrear.jpg (57185 bytes)
Rear view

Ref: AB10:
Price £13.50

Cemetery Gatehouse at
Gettysburg.

Kit comprises resin and white metal parts for assembly.

stonehs.jpg (62503 bytes)


Ref: AB11: Price £5.00

StoneHouse (Mathews House, Bull Run/Manassas)
Resin model. 

NEW - No photo of finished model available as yet, but there are diagrams included in the kits.
Ref: AB12 - LACY HOUSE (CHATHAM MANSION) - Price £37.50
This kit comprises: Main House, Main House Porch, Main House Porch Roof, Right Wing, Left Wing, End Building, L&R Porch, L&R Porch Roof, 2 x Chimneys, Balcony, Porch Roof Support, 4 x Round Columns, 8 x Square Columns, Wide Step, Narrow Step,
3 x Medium Steps.
The buildings are resin cast; some of the smaller items are metal cast.

Ref: AB13 - SOUTHERN MANSION - Price £20.50
This is in fact the main house of the Lacy House (above). The kit comprises: Main House, Porch, Porch Roof, End Building, 2 x Chimneys, Balcony, Porch Roof Support, 4 x Square Columns, 4 x Round Columns, Wide Step, Narrow Step, Medium Step.

 

FIELDWORKS
Suitable for 10mm or 15mm. With feature headlogs and wooden retaining wall - all part of the
casting. These are modular sections, the larger items being in resin and the smaller pieces
in white metal.

In the photograph below:
The model in the foreground shows one view of a straight section (AB20),
two angled sections (AB21)  and a pair of end pieces (AB24)
covering an area of 220mm x 50mm.

The model to the rear, shows the wooden retaining walls of two straight sections (AB20).

eworks.jpg (32139 bytes)

These Fieldwork sections are available as follows:

Ref: AB20 (resin)

Straight

80x20mm

£1.50

Ref: AB21 (resin)

45 degree angle

72x30mm

£1.50

Ref: AB22 (metal)

90 degree corner

 

60p

Ref: AB23 (metal)

45 degree corner

 

30p

Ref: AB24 (metal)

End pieces (x2)

 

£1.20

 

Top of page  /  10mm Figures & Flags  /  Home Page  /   To Order